Measurements of friction coefficients between rails lubricated with a friction modifier and the wheels of an IORE locomotive during real working conditions

Projekt:

JVTC

Sammanfattning:
The real friction coefficients between the rails and the wheels on a 360. t and 10,800. kW IORE locomotive were measured using the locomotive[U+05F3]s in-built traction force measurement system. The locomotive consisted of two pair-connected locomotives had a CoCo+CoCo bogie configuration, and hauled a fully loaded set of 68 ore wagons (120. t/wagon). The measurements were performed both on rails in a dry condition and on rails lubricated with a water-based top-of-rail (ToR) friction modifier on the Iron Ore Line between the cities of Kiruna and Narvik in Northern Sweden and Norway, respectively. Since full-scale measurements like these are costly, the friction coefficients were also measured at the same time and place using a conventional hand-operated tribometer, with and without the ToR friction modifier. The most important results are that the real friction coefficient is definitely not constant and is surprisingly low (0.10-0.25) when the ToR friction modifier is used, and that it is also significantly dependent on the amount of ToR friction modifier. A large amount will reduce the friction coefficient. Furthermore, it is concluded that the real friction coefficients are in general lower than the friction coefficients measured with the hand-operated tribometer. A final remark is thus that the use of a water-based ToR friction modifier can give excessively low friction, which can result in unacceptably long braking distances.

Författare: Jan Lundberg ; Matti Rantatalo ; Christina Wanhainen ; Johan Casselgren
Utgivare: Wear
Utgivningsdatum: 2015-02-05
Diarienummer: TRV 2011/58769
ISSN: 0043-1648
Antal sidor: 9
Språk: Engelska
Kontaktperson: Per Olof Larsson Kråik, UHjbs